Strap Protection:
Protect your products from damage caused by steel or plastic strapping by using Hard Angle. Strapping improves loadstability and fastens product to pallets but can damage finished goods when tension is applied. Hard Angle placed under your strapping will allow for the maximum amount of tension to be applied and will prevent damage to your product. Unlike plastic angle boards Hard Angle will "dimple" at its edge reducing the changes of the strap slipping off during the warehousing and shipping process and still provide cost effective product protection.

     
Stacking Strength / Internal Reinforcement:
Hard Angle when used vertically at the corners inside of a corrugated box or for unitizing a pallet of smaller boxes reinforces packages helping the load to bear the weight of product stacked above it. Stacked units must be placed directly on all four Hard Angles to insure proper performance. This allows for greater vertical stacking heights of products increasing utilization of available warehouse space. Consult your Multi-Wall Sales Representative for the proper Hard Angle for your application.

    
Corner and Edge Protection:
Hard Angle placed on the corners and edges of palletized load provides cost effective product protection throughout the handling process. When used on the vertical edges Hard Angle protects finished goods from damage in shipping and storage.

Placed on the top edge, it will protect your products from damage due to fork truck blades and possible crushing by stacked loads above.

Hard Angle will help lower costs by absorbing the blows that would have damaged goods.

Unitization:
Reduce your packaging costs by using Hard Angle in conjunction with stretch film or strapping. Hard Angle helps to create a superior package by increasing tension transmission at the corners forming the product into a tight square cube. This will help to prevent damage by eliminating shifting during the handling process.